Operation Manual

234 | CorelDRAW X8 User Guide
Intelligent Spacing displays indicators when an object is equidistant between two
other objects (left) or has the same spacing as the closest onscreen objects (right).
To enable or disable alignment guides
•
Click View Alignment guides.
A check mark beside the Alignment guides command indicates that alignment guides are enabled.
You can also enable or disable alignment guides by clicking the Alignment guides button on the Layout toolbar. To open the Layout
toolbar, click Window Toolbars Layout.
You can also enable alignment guides by pressing Shift + Alt + A.
To modify alignment guide settings
1
Click Window Dockers Alignment and dynamic guides.
2
In the Alignment and dynamic guides docker, click the Alignment guides button .
3 Perform any of the following tasks.

To Do the following
Enable or disable alignment guides Enable or disable the check box in the top-right corner of the
Alignment guides section.
Change the color of alignment guides Open the Line color picker, and choose a color.
Change the line style of alignment guides Open the Line style picker, and choose a line style.
Set guides to align the edge of an object with the edge of another
object
Click the Object edges button .
Set guides to align the edge of an object with the center of another
object
Click the Object centers button .