Operation Manual

Working with objects | 223
Scattered objects (left) are vertically aligned and equally distributed (right).
To align objects
1 Select the objects.
2
Click Object Align and distribute Align and distribute.
3 In the Align area of the docker, click one of the following buttons to use an object edge or center for aligning.
•
Align left — to align the left edges of objects
•
Align center horizontally — to align object centers along a vertical axis
•
Align right — to align the right edges of objects
•
Align top — to align the top edges of objects
•
Align center vertically — to align object centers along a horizontal axis
•
Align bottom — to align the bottom edges of objects
To align objects from their outlines, click the Outline button .
4 In the Align objects to area, perform any of the following tasks.

To Do the following
Align an object with a specific object
Click the Active objects button .
If you select the objects one at a time, the last object selected is the
reference point for aligning the other objects. If you marquee select
the objects, the object that is positioned in the upper-left corner of
the selection is used as a reference point.
Align an object with the page edge
Click the Page edge button .
Align an object with the page center
Click the Page center button .
To align the center of the object with the page center, make sure
that the Align center horizontally button and Align center
vertically button in the Align area are enabled.