Operation Manual

Drawing shapes | 157
To set shape recognition delay
1
Click Tools Options.
2 In the Workspace list of categories, click Toolbox, and click Smart drawing tool.
3 Move the Drawing assistance delay slider.
The minimum delay is 10 milliseconds; the maximum is 2 seconds.
To make a correction while using shape recognition
• Before the delay recognition period has elapsed, hold down Shift, and drag over the area you want to correct.
You must start erasing the shape or line from the last point drawn.
If you are drawing a freehand shape consisting of several curves, you can delete the last curve drawn by pressing Esc.
To change the outline thickness of an object drawn with shape recognition
1
In the toolbox, click the Smart drawing tool .
2 Click the shape.
3 From the Outline width list box on the property bar, choose an outline thickness.
The Smart drawing tool property bar is displayed only when the Smart drawing tool is selected.
When you overlap lines drawn with the Smart drawing tool, the outline thickness is determined by the average.
You can change the line style of a shape drawn with shape recognition. For more information, see “To specify line and outline
settings” on page 128.
