Operation Manual

Working with lines, outlines, and brushstrokes | 133
To remove the outline of an object
1 Select an object.
2 On the property bar, choose None from the Outline width list box.
You can also remove an object’s outline by selecting the object and right-clicking the No color swatch on the color palette.
Closing multiple line segments
You can quickly create a closed object from line segments by selecting which lines you want to connect and the shape of the connecting line.
You can connect lines by using the closest nodes between lines. The connecting line can be either straight or curved. You can also connect
lines by using their start and end nodes. The end node of the first selected line connects directly with the starting node of the closest
selected line. The connected lines take on the properties of the first line selected.
Closing multiple line segments can be the starting point for more complex drawings.
To close multiple line segments
1
Hold down Shift, and select each object using the Pick tool .
2
Click Object Join curves.
3 In the Join curves docker, choose one of the following options:
• Extend
• Chamfer
• Fillet
• Bezier curve
4 Click Apply.

You can also 
Specify the gap tolerance Type a value in the Gap tolerance box.
Specify the radius Type a value in the Radius box.