Operation Manual

116 | CorelDRAW X8 User Guide
The Freehand tool lets you control the smoothness of the curved line you are drawing as well as add segments to an existing line. However,
the Polyline tool is easier to use for quickly drawing a complex line that consists of alternating curved and straight segments.
In addition to drawing freehand lines and straight segments, you can use the Polyline tool to draw circular arcs.
You can choose settings to control how the Freehand and Polyline tools behave. For example, you can change the default smoothness of a
curved line that you’ve created with these tools.
2-point line tool
You can draw straight lines by using the 2-point line tool. This tool also allows you to create straight lines that are perpendicular or tangent
to objects.
Bézier and Pen tools
The Bézier and Pen tools let you draw lines one segment at a time by placing each node with precision and controlling the shape
of each curved segment. When using the Pen tool, you can preview the line segments you are drawing.
You can draw lines with multiple segments by using the Bézier tool and clicking each time you want the line to change direction.
You can draw curves by using the Bézier tool and dragging the control handles at the ends of the Bézier curve.
B-spline tool
By using control points, you can easily shape a curved line and draw B-splines, which are typically smooth, continuous curved lines. B-splines
touch the first and last control points and are pulled by the points in between. However, unlike the nodes on Bézier curves, control points
don’t let you specify the points through which a curve passes when you want to align a curve with other drawing elements.
The control points that touch the line are referred to as “clamped.” Clamped control points function as anchors. The control points that pull
the line but do not touch it are referred to as “floating.” The first and last control points are always clamped on open-ended B-splines. The
points in between float by default, but you can clamp points if you want to create cusps or straight lines within the B-spline. You can edit
completed B-splines by using the control points.