Operation Manual

Preparing files for print service providers | 585
To print crop and fold marks, ensure that the paper on which you print is 0.5 inches larger on all sides than the page size of the
image that you are printing.
To set crop and fold marks, see “To edit gutters” on page 583.
To print composite crop and fold marks
1
Click Tools Options.
2 In the list of categories, double-click Global, and click Printing.
3 Choose Composite crop marks (PS) from the Option list.
4 Choose Output on all plates from the Setting list box.
To set a bleed limit
1
Click File Print.
2 Click the Layout tab.
3 Enable the Bleed limit check box.
4 Type a value in the Bleed limit box.
Usually, a bleed limit of 0.125 to 0.25 inches is sufficient. Any object extending beyond that uses memory needlessly and may cause
problems when you print multiple pages with bleeds on a single sheet of paper.
To print registration marks
1
Click File Print.
2 Click the Prepress tab.
3 In the Registration marks area, enable the Print registration marks check box.
4 Choose a registration mark style from the Style picker.
To print registration marks, ensure that the paper on which you print is 0.5 inches larger on all sides than the page size of the image
that you are printing.
To print color calibration bars and densitometer scales
1
Click File Print.
2 Click the Prepress tab.
3 In the Calibration bars area, enable any of the following check boxes:
• Color calibration bar
• Densitometer scales
If you want to customize the levels of gray in one of the densitometer scale squares, choose a number from the Densities list (lower
values represent lighter squares), and type a new density for that square.
To print page numbers
1
Click File Print.
2 Click the Prepress tab.