Operation Manual

572 | Corel DESIGNER X7 User Guide
To print as a bitmap
1
Click File Print.
2 On the General tab, enable the Print as bitmap check box, and type a number in the dpi box to set the resolution.
To downsample bitmaps
1
Click File Print.
2 Click the Prepress tab.
3 In the Bitmap downsampling area, enable any of the following check boxes and type a value in the corresponding box:
• Color and grayscale
• Monochrome
Downsampling bitmaps affects them only when their resolution is higher than the resolution specified in the Bitmap downsampling
area.
Printing colors accurately
Corel DESIGNER allows you to manage colors when printing to ensure accurate color reproduction. You can print the document with the
document colors settings applied or you can choose alternate color settings only for printing. You can also print a document using the color
proofing settings that you previously specified in the Color proof settings docker. For more information, see “Using color management” on
page 323.
In addition, you can choose a rendering intent to effectively interpret the out-of-gamut colors when printing. The rendering intent that you
choose depends on the graphic content of the document. For more information, see “Understanding color management” on page 323.
For more information about color management, see “Using color management” on page 323.
Notes for GDI printers
GDI printers support only two color spaces: RGB and Grayscale. If your document contains colors from multiple color spaces, for example
RGB, CMYK, and spot colors, you must convert all the colors to RGB or Grayscale before printing.
You can determine if a printer is a GDI printer by clicking File Print and choosing a printer from the Printer list box. If the PostScript
tab does not appear at the top of the dialog box, the selected printer is a GDI printer.
The following table describes different ways of managing color when printing to a GDI printer.

How to In the Print dialog box
Print the document and preserve the RGB or Grayscale colors Click the Color tab, and choose the appropriate color mode from
the Output colors as list box.
Print the document with original colors Click the Color tab, and choose the document color profile from
the Document profile area of the Correct colors using color
profile list box.
Print the document and convert the document colors to the printer
colors
Choose the printer color profile from the Correct colors using
color profile list box.