Operation Manual

Working with pages and layout tools | 499
You can also add a guideline by dragging from the horizontal or vertical ruler to the drawing window.
To add an angled guideline
1
Click Tools Guidelines.
2 Choose Angled from the Guideline type list box
3 Specify the location of the guideline in the x and y boxes.
4 Type a value in Angle of rotation box.
5 Click Add.
You can also add an angled guideline by dragging from the horizontal or vertical ruler in the drawing window, and typing a value in
the Angle of rotation box on the property bar.
To use an object as a guide
1 In the Object manager docker, click the Guides layer on the page you want.
If the Object manager docker is not open, click Object Object manager.
2 Draw and position the object you want to use as a guide.
To set guidelines for the entire document
1 In the Object manager docker, click Guides (all pages) on the Master page.
If the Object manager docker is not open, click Object Object manager.
2 In the drawing window, add the guidelines you want.
The guidelines that you set on the Guides (all pages) layer of the Master page appear on all pages of the document. These
guidelines appear in addition to any guidelines that you set for individual pages.
To add preset guidelines
1
Click Tools Options.
2 In the Document, Guidelines list of categories, click Presets.
3 Enable one of the following options:
• Corel presets
• User-defined presets
4 Specify guideline settings by enabling the corresponding check boxes.
If you enable the User-defined presetsoption, specify values in the Margins, Columns, or Grid area.
5 Click Apply presets.
To remove a guideline
1
Click Tools Guidelines.
2 Choose a guideline from the list.
You can choose multiple guidelines by holding down Ctrl as you click.
3
Click the Delete guideline button .