Operation Manual

356 | Corel DESIGNER X7 User Guide
To Do the following
Stretch the blend over an entire path Select a blend that is already fitted on a path. Click the More blend
options button on the property bar, and enable the Blend
along full path check box.
Create a compound blend Using the Blend tool, drag from an object to the start or end object
of another blend.
You can also blend objects by using the Blend docker (Effects Blend).
To copy or clone a blend
1 Select the two objects that you want to blend.
2 Click Effects, and click one of the following:
•
Copy effect Blend from
•
Clone effect Blend from
3 Select the blend whose attributes you want to copy or clone.
You can’t copy or clone a compound blend.
You can also use the Attributes eyedropper tool to copy a blend. For more information, see “To copy object properties from
one object to another” on page 216.
To set the number of intermediate objects in a blend
1 Select a blend.
2 Type a value in the Blend objects box on the property bar.
3 Press Enter.
You can set object and color acceleration rates by clicking the Object and color acceleration button on the property bar and
moving the corresponding slider.
To set the distance between objects in a blend that is fit to a path
1 Select a blend that is fit to a path.
2
Click the Blend spacing button on the property bar.
3 Type a value in the Blend objects box on the property bar.
4 Press Enter.
If you have used the Blend along full path command, the Blend spacing button is unavailable.