Operation Manual

326 | Corel DESIGNER X7 User Guide
color space. These methods are known as “rendering intents.” The choice of a rendering intent depends on the graphical content of the
document.
Many colors in an sRGB document may be out of gamut for the U.S. Web Coated (SWOP) v2
color space. The out-of-gamut colors are mapped into gamut according to the rendering intent.
The following rendering intents are available:
• The Relative colorimetric rendering intent is suitable for logos or other graphics that contain only a few out-of-gamut colors. It matches
the out-of-gamut source colors with the closest in-gamut colors at the destination. This rendering intent causes the white point to shift.
If you print on white paper, the whiteness of the paper is used to reproduce the white areas of the document. Therefore, this rendering
intent is a good option if your document will be printed.
• The Absolute colorimetric rendering intent is suitable for logos, or other graphics, that require very precise colors. If no match is found
for the source colors, then the closest possible match is used. The Absolute colorimetric and Relative colorimetric rendering intents
are similar, but the Absolute colorimetric rendering intent preserves the white point through the conversion and does not adjust for the
whiteness of the paper. This rendering intent is used mainly for proofing.
• The Perceptual rendering intent is suitable for photographs and bitmaps that contain many out-of-gamut colors. The overall color
appearance is preserved by changing all the colors, including the in-gamut colors, to fit within the range of colors at the destination. This
rendering intent maintains the relationships between colors to produce the best results.
• The Saturation rendering intent produces more concentrated solid colors in business graphics, such as charts and graphs. Colors may be
less accurate than those produced by other rendering intents.