Operation Manual

216 | Corel DESIGNER X7 User Guide
2
Click Edit Step and repeat.
3 In the Step and repeat docker, type a value in the Number of copies box.

To Do the following
Distribute copies of objects horizontally In the Vertical settings area, choose No offset from the Mode
list box. In the Horizontal offset area, choose Spacing between
objects from the Mode list box. To specify the spacing between
object copies, type a value in the Distance box. To place the object
copies to the right or left of the original, choose Right or Left from
the Direction list box.
Distribute copies of objects vertically In the Horizontal settings area, choose No offset from the Mode
list box. In the Vertical offset area, choose Spacing between
objects from the Mode list box. To specify the spacing between
copies of objects, type a value in the Distance box. To place the
copies above or below the original, choose Up or Down from the
Direction list box.
Offset all copies of objects by a specified distance In the Horizontal offset and Vertical offset areas, choose Offset
from the Mode list box, and type values in the Distance boxes.
Multiple copies of an object are offset by a specified distance.
Copying object properties, transformations, and effects
You can copy object properties such as outline, fill, and text properties from one object to another. You can copy object transformations such
as sizing, rotating, and positioning as well as effects applied to an object.
To copy object properties from one object to another
1
Click the Eyedropper tools button, and click the Attributes eyedropper tool .
2 Click Properties on the property bar, and enable any of the following check boxes:
• Outline
• Fill
• Text
3 Click the edge of the object whose properties you want to copy.