Operation Manual

Shaping objects | 197
Distortion effect Description
Push and pull Lets you push the edges of an object in or pull the edges of an
object out.
Zipper Lets you apply a sawtooth effect to the edges of the object. You
can adjust the amplitude and frequency of the effect.
Twister Lets you rotate an object to create a swirl effect. You can choose
the direction of the swirl, as well as the origin, degree, and amount
of rotation.
After you distort an object, you can change the effect by altering the center of distortion. This point is identified by a diamond-shaped
handle, around which a distortion appears. It is similar to a mathematical compass, where the pencil moves around a stationary point. You
can place the center of distortion anywhere in the drawing window, or choose to center it in the middle of an object so that the distortion is
distributed evenly and the shape of the object changes in relation to its center.
You can create an even more dramatic effect by applying a new distortion to an already distorted object. You don’t lose the effect of the
original distortion if, for example, you apply a zipper distortion on top of a twister distortion. Corel DESIGNER also lets you remove and copy
distortion effects.
To distort an object
1
Click the Interactive tools button in the toolbox, and click the Distort tool .
2 On the property bar, click one of the following buttons, and specify the settings you want:
• Push and pull distortion
• Zipper distortion
• Twister distortion
3 Point to where you want to place the center of distortion, and drag until the object is the shape you want.

You can also 
Change the center of distortion Drag the diamond-shaped position handle to a new location.
Adjust the number of points on a zipper distortion Move the slider on the center of the distortion handle.
Apply a preset distortion Choose a distortion preset from the Preset list box on the property
bar.
Apply more than one distortion to an object Choose another distortion type on the property bar, click an object,
and drag.

You can reapply the effects to distorted objects.
You can center a distortion by clicking the Center distortion button on the property bar.