Operation Manual

Shaping objects | 191
Smearing an object
To smudge an object
1
Select a curve object using the Pick tool .
2
Click the Shape tools button in the toolbox, and click the Smudge brush tool .
3 Drag around the outline to distort it.

You can also 
Change the size of the brush nib
Type a value in the Nib size box on the property bar.
Change the size of the brush nib when using a pen tablet
Click the Pen pressure button on the property bar, and apply
pressure to the pen.
Widen or narrow the smudging
Type a value between -10 and 10 in the Dryout box on
the property bar.
Specify the shape of the smudging
Type a value between 15 and 90 in the Tilt box on
the property bar.
Change the shape of the smudging when using a pen tablet
Click the Pentilt button on the property bar.
Specify the angle of the nib shape for smudging
Type a value between 0 and 359 in the Bearing box
on the property bar.
Change the angle of the nib shape for smudging when using a pen
tablet
Click the Pen bearing button on the property bar.
Smudge the inside of an object Click the outside of an object and drag inwards.
Smudge the outside of an object Click the inside of an object an drag outwards.