Operation Manual

Drawing shapes | 167
3 Click Smart drawing tool.
4 Move the Drawing assistance delay slider.
The slider moves in increments of 0.25 seconds; the maximum delay is 2 seconds.
To make a correction while using shape recognition
• Before the recognition delay has elapsed, hold down Shift, and drag over the area that you want to erase. Release Shift to continue
drawing.
You must start erasing the shape or line from the last point drawn.
If you are drawing a freehand shape consisting of several curves, you can delete the last curve drawn by pressing Esc.
To change the outline thickness of an object drawn with shape recognition
1
Click the Curve tools button, and click the Smart drawing tool .
2 Click the shape.
3 From the Outline width list box on the property bar, choose an outline thickness.
When lines drawn with the Smart drawing tool overlap, the outline thickness is determined by the average.
You can change the line style of a shape drawn with shape recognition. For more information, see “To specify line and outline
settings” on page 144.