User's Manual

DSLAAU Manual

MAC OS 9.x

If you have not done so yet, connect corega DSLAAU to the computer

using the proper USB device cable. Connect the DSL line to corega

DSLAAU, too.

TCP/IP settings are set up automatically during the software installa-

tion process. The following procedure may be used to change TCP/IP

settings, if necessary.

1. Click on the Apple icon ( ), then select Control Panels =>

Modem

2. Make sure that the ADSL USB Modem appears in the Modem: drop-

down list. You can modify the dialup settings such as dialing sound

and type.

3. Close the “Modem” window (click on the top left corner). You will be

prompted to save the current conﬁguration. Click <Save>.

4. Next, click again on the Apple icon ( ), and then select Control

Panels => TCP/IP.

5. The “TCP/IP” window will appear.