Specifications

3-3 Status
The Status page shows the status of the r
outer.
Modem
• Modem Status Possible options are “Connecting” (when establishing an ADSL connection) and “Connected” (when the ADSL link is
active).
•
DownStream Connection Speed This is the speed of the ADSL link from the ISP to the router. The actual speed is dependent upon a number of
parameters including your distance fr
om the ISP’s ADSL equipment, and the number of other users also connected to
their equipment.
•
UpStream Connection Speed This is the speed of the ADSL link from the router to the ISP.
•
VPI The VPI
ADSL parameter
•
VCI The VCI ADSL parameter
Internet
• Connection Method Possible options are PPPoE, PPPoA, Dynamic IP, Static IP, Classical IP and Modem. These are selected in the One-Page-
Setup.
•
Internet Connection This shows the status, either active or idle.
•
Internet IP Address This is the IP address assigned to the router by your ISP.
LAN
• IP Address This is the first IP address that would be assigned by the internal DHCP Server. To change this value go to DHCP.
•
Network Mask This is the subnet mask associated with the DHCP network IP address.
•
DHCP Server Shows either enabled or disabled.
•
MAC Address This is the physical MAC level address of the WAN (ADSL) port of the router.
Wireless
• Name (SSID) This is the SSID of the router. The default is “corega”.
•
Region This is selected from the One-Page-Setup. Different regions support different numbers of wireless channels.
•
Channel The active wireless channel. To change, go to One-Page-Setup.
•
Wireless AP This shows that the internal wireless access point is active.
•
Broadcast SSID This shows if the router is broadcasting the SSID name that it is using.
System
• Device Name Shows the device Name
•
Firmware Version The revision of the router firmware.
ENGLISH
14