Specifications

ManualsBrandsCorega ManualsComputer equipmentCOR-BAR-AWLB-54

Appendix B: Technical Specifications

Standards Compliance

ADSL G.dmt for 8Mbps downstream & 640Kbps upstream

ADSL G.lite for 1.5Mbps downstream & 512Kbps upstream

IEEE 802.3 10/100BASE-T/TX

IEEE 802.11g Wireless

Interface

One ADSL interface RJ-11 connector WAN

Four 10/100Mbps auto-sensing Ethernet RJ-45 connectors

Management

Web-based UI Management

LED Display

Power

DIAG / Transaction

Wireless Link/Activity

Link/Activity for both ADSL and LAN port(s)

Environment

Operation Temperature: 0°C ~ 45 °C (32°F ~ 113 °F)

Storage Temperature: -20°C ~ 60 °C (-4°F ~ 140 °F)

Humidity: 0 ~ 90% non-condensing

Dimension

150 (L) x 190 (W) x 39 (H) mm

Power

External, DC 12V, 1A

Mounting

Desktop

Wall-mounting

Appendix C: Configuring IPSec between a Microsoft Windows 2000 or XP PC and router

This appendix illustrates the steps of a Microsoft Windows 2000 (or XP) PC establishing a secure IPsec Tunnel with this router. You can find detailed information on

configuring the Microsoft Windows 2000 server at the Microsoft website:

Microsoft KB Q252735 - How to Configure IPSec Tunneling in Windows 2000

http://support.microsoft.com/support/kb/articles/Q252/7/35.asp

Microsoft KB Q257225 - Basic IPSec Troubleshooting in Windows 2000

http://support.microsoft.com/support/kb/articles/Q257/2/25.asp

C-1 Environment

Windows XP or Windows 2000

IP Address: 140.111.1.2 (Note: ISP provided IP Address; this is only an example.)

Subnet Mask: 255.255.255.0

Router

WAN

IP Address: 140.111.1.1 (Note: ISP provided IP Address, this is only an example.)

Subnet Mask: 255.255.255.0

LAN

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

C-2 Steps in Windows 2000/XP

C-2.1 Create IPSec Policy

1. Click Start button, select Run, and type secpol.msc in the open field.

2. Right-click IP Security Policies on Local Computer, and then click Create IP Security Policy.

3. Click Next, and then type a name for your policy (for example, “to_VPNRouter”).

4. Deselect the Activate the default response rule check box, and then click Next button.

5. Click the Finish button, making sure the Edit check box is checked.

ENGLISH