Specifications

Figure 34. DMZ Host
DMZ Host
1. Before setting up a LAN PC to act as a DMZ Host, you should configure it using a fixed IP Address.
2. Ensure that the “Private IP Address” of the router is set to the default value of 192.168.1.1.
3. Click the “DMZ Host” option in the Advanced Menu and enter the fixed IP Address of the Exposed Host PC in the “DMZ Host” IP Address location. Entering “0”
will disable this application.
Multi DMZ
1. Enter the valid public IP address in “WAN IP” column. Next, enter the private IP address of the PC that you wish to map to in the “LAN IP” field. Up to five
public IP addresses can be entered.
2. Click the “Apply” button after making any changes, or click the “Cancel” button to exit the screen without saving any changes.
4-10 Dynamic Routing
The Dynamic Routing feature allows the router to exchange routing information with other routers in the network.
Figure 35. Dynamic Routing
• TX From the drop-down list, select one of the routing types:
-“RIP-1” is the protocol used by older routers
-“RIP-1 Compatible”, supports broadcast RIP-1 and multicast RIP-2
-“RIP-2” is the protocol used by newer routers
- Disabled
• RX From the drop-down list, select one of the routing types:
-“RIP-1”
-“RIP-2”
- Disabled
Click the “Apply” button after making any changes, or click the “Cancel” button to exit the screen without saving any changes.
ENGLISH
20