Specifications

Model IP901 Weatherproof Day/Night Network IP Camera
16
3.4. Advanced Network
In some special situation, your network environment only provides PPPoE connection
(xDSL service), there is no NAT/router available. You will then need to set the PPPoE settings
in the “Advanced Network” page. Only the PPPoE username and password are needed to let
PPPoE work. After the “Save&Apply” button is pressed, the PPPoE function will work
immediately. You can check the “Registration status” in the “Information” page to see if the IP
CAM is registered using the PPPoE connection.
Please be noticed that the DHCP or static IP settings in the “Network” page can work
together with the PPPoE connection. Only that the PPPoE has higher priority, so, if the PPPoE
is working, the IP CAM will use PPPoE to connect to the Internet.
The default setting is “Disable PPPoE”.
Figure 3-7: Advanced network settings page