User Guide

WPS Setup Guide
1. Power on the E300 next to your router.
2. Press the WPS button of the front panel on E300
around 6 seconds.
3. Once release, the E300 WPS light starts blinking,
press the WPS of your router within 2 minutes.
4. After connected successful, the SSID of E300 will be
changed into “E300_EXT”. You can connect the E300
by using the same password with your router.
5. Locate the E300 into the suitable place (how to locate
the repeater please refer to the troubleshoots in USER
MANUAL).
Need video setup guide? Scan this QR code.