User Manual

01
Preparing:
Below setup guide just for REPEATER Mode. If you need
setup by AP and Router mode, please refer to User
Manual. More details about troubleshoots please go to
User Manual.
1. Route works normal.
2. Switch the side button of repeater into “ON” & “Repeater”
3. Electrical Outlet close to router.
Web-Browser Method:
1.
Plug it into an electrical outlet ( closest to your primary
router/WiFi access point )
2.
Use your Smart-Phone to connect with the repeater (find
"Coredy E300" and connect with it, if password request
try PIN number of the rear panel)
3.
Visit http://ap.setup/ or the IP address 192.168.10.1
from a web browser.
4.
Log-in to the Admin Page by using "admin" in a
lower-case for both username and password, and then
click "repeater wizard" in the next window.
5.
Choose your Router's/AP's network in the next window
and select it.
Setup Process
Quick Installation Guide