User Manual

15
Cable Your AP
The following image shows how to cable your AP:
1. Power on the AP, turn the Power On/Off button to “On”
and Mode Switch Button to “Access Point” on the side of
the AP, plug the AP into an electrical outlet.
2. Connect the AP to your wired Ethernet port with the
Ethernet cable came with your AP.
3. Use a WiFi network manager on a computer or mobile
device (recommended) to find and connect to the AP
WiFi network “Coredy E300” , type the password (PIN
number) on the label of rear panel AP if required.
WLAN
Power/WPS
WAN/LAN
LAN
MAC:80:3F:5D:8A:7E:AA
PIN:XXXXXXXX
WAN Port
LAN Port WAN Port
Ethernet cable
LAN4 LAN3 LAN2 LAN1 WAN
Internet
DSL or Cable
WLAN
Power/WPS
WAN/LAN
LAN