User Manual

Connect an Ethernet-Enabled Device

After the extender is connected to your existing WiFi

network, you can connect a wired device to the extender

using an Ethernet cable. That device can then access your

existing network through the WiFi connection.

WLAN WAN LAN1 LAN2 LAN3 LAN4 WPS

WLAN

Power/WPS

WAN/LAN

LAN

Find and connect to the new extended WiFi network on

your computer or WiFi device.

The extender creates a new extended WiFi network. The

extender’s new WiFi network name is “Coredy

E300_EXT”, use the same WiFi password that you use for

your WiFi router.

Note: Place the extender in an elevated location and

minimizing the number walls and ceilings between the

router and your other devices.

Note: If the extender doesn’t connect to the router, the

WLAN LED 1 keeps blinking and the extender’s new WiFi

network name doesn’t change to “Coredy E300_EXT” .