User manual

ColourPoint User Manual V1_2
13
Additional Settings
A number of additional settings may be accessed within the menu system:
Power Mode
Under the “CHANGE Settings” menu ColourPoint has two power modes that can be selected:
Power LongLife 50% Power
Power Normal Full Power
The “Normal” option provides maximum light output at the cost of reduced battery life.
“LongLife” reduces the LED output by 50%, therefore enables 2 x running period for ALL
FUNCTIONS, whether stand-alone or DMX.
To change the power mode press and use the keys to select “CHANGE Settings”
then press . Use the keys to select “POWER MODE” and press to select.
Use keys to toggle between “Norm” and “LongLife” then press to save changes. This
setting affects all Static, Cust Colr and DMX modes so that the battery life of each unit can be
individually set, irrespective of what’s controlling it.
Brightness Control
Under the “CHANGE Settings” menu ColourPoint has a separate brightness control that can control
the output of the unit in stand-alone mode:
The value may be changed from 0 to 100% in five steps:
0%, 20%, 40%, 60%, 80%, 100%.
Press and use the keys to select “CHANGE Settings” then press . to accept.
Use the keys to select “BRIGHTNS CONTROL” and press to select.
Use keys to toggle between “0%” and “100%” then press to save changes. This setting
adjusts Static and Cust Col modes only.
DMX mode remains unchanged as the unit remains under external control.
Soft Dimmer
ColourPoint is equipped with a soft dimmer curve option which ‘smoothes out’ the dimmer curve as
well as improving the fade at extremely low levels.
To enable soft dimming press and use the keys to select “CHANGE Settings” then
press to select.