Product Manual

19
MOTOR CONTROL SWITCHES – cont’d
3. While squeezing the trigger switch,
push the START switch (3) forward
momentarily with your thumb. At
this point, the hedge trimmer will
start reciprocating the cutting
blades.
NOTE: Once the hedge trimmer has
started, release the START button and
the hedge trimmer will continue to run.
4. To stop the hedge trimmer, release
the trigger switch.
WARNING: When the trigger
switch is released, the hedge trimmer
will "coast" for approximately 1 second
before it comes to a complete stop.
ASSEMBLY AND OPERATING
Fig. 3
!