ANT800BAR User Manual 80-Mile Range Amplified Indoor TV Antenna with Signal Level Indicator
I. Included Parts 1 Antenna with Attached Coaxial Cable (9.8’) 2 Power Supply 3 2/16’’ x 1’’ Screws 4 Anchors II.
III. Key Considerations For Your Installation Site • Be sure that installation is in accordance with all local, city and state electrical and building codes. • Understand where broadcast towers are located in your area. Visit www.antennapoint.com or www.antennaweb.org and enter your zip code to identify the channels you can expect to receive.
Step 1: Connect Your Antenna to Your TV Plug the barrel end of the power supply into the DC input on the antenna, and the AC end into an electrical outlet. If your TV has a digital tuner: Simply connect the antenna’s coaxial output cable directly to your TV’s antenna input port. TV ANT IN Coaxial Cable If your TV does not have a digital tuner: Connect the antenna’s coaxial output cable to your digital converter box, and then connect your converter box output cable to your TV.
Step 2: Check the LED Signal Indicator The built-in LED signal indicator assists in locating the best channel reception. The LED lights indicate ideal signal strength. GOOD BETTER BEST Step 3: Scan for Channels To perform a TV channel scan: • Set the tuner mode to “Antenna” or “Air” on your TV’s setup menu. • Set your TV to scan for channels. This may be listed as auto-program, auto-scan, channel search or channel scan.
Step 4: Place Your Antenna Once you have found the optimal location for your antenna, you may choose 1. Tabletop Placement Place your antenna on a console, table or near your TV. 2. Wall Mounted Use the included 2/16’’ x 1’’ screws and plastic anchors to mount your antenna to the wall.
Troubleshooting I am not getting any channels, or channels are missing. Keep your antenna away from sources of interference, including air conditioners, hair dryers and microwave ovens. Move or rotate your antenna and re-run a channel scan on your TV. Refer to your TV’s user manual for more information. Picture or sound freezes while I am watching a channel. Picture quality is weak. This is often caused by a weak or intermittent signal. Try moving or rotating your antenna to a different location or angle.
Troubleshooting Does my antenna work with any HDTV? Your antenna works with any HDTV or device that has an ATSC tuner. Any TV manufactured after March 1, 2007 is required by US government to have an ATSC tuner. If your TV menu has an option to scan for digital channels, your TV has an ATSC tuner. How many channels will I receive with my antenna? The number of channels will vary from location to location.
Specifications • • • • • 80-Mile Range 1080P Full HD, 4K Ultra HD Ready Omni-Directional 3G/4G/5G LTE Filter In the Box: Antenna with Built-in Amplifier, Power Adapter, Mounting Screws & Anchors, User Manual, Warranty Card Need Help? For customer support regarding your device, please submit a request by emailing support@dpaudiovideo.zendesk.com. You will be provided a ticket number regarding your inquiry, which you can refer to when contacting us further.
Warranty Information Limited Warranty Core Innovations (the “Company”) warrants the product purchased and contained in this package (the “Product”) against defects in material or workmanship for 90 Days (Parts & Labor) and 1 Year (Limited). In order for the Company to honor this limited warranty, you must present a valid proof of purchase (i.e. a receipt) of this Product.
Appendix Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Core Innovations intends to make this manual accurate and complete. However, Core Innovations makes no claim that the information contained herein covers all details and conditions. The information in this document is subject to change without notice at any time. Core Innovations assumes no responsibility for accuracy or completeness of the information contained in this manual.
