User Manual

Thank you for your purchase!
Like our product?
Leave a review on your favorite
retailer website or amazon.com
Having problems?
Let us know how we can help.
Call 1-800-654-8483 between
7AM-8PM, M-F, Central Time.
Discover more
innovative products at
byjasco.com/CE
Register your product
Scan code or visit byjasco.com/deals
Receive exclusive deals and
register your product.
Bluetooth® Earbuds
with charging case
User Manual
Get to know your earbuds!
CHARGING
Before initial use, make sure the earbuds and case are fully charged.
Charging the case:
Charge the case using the included USB cable. The white LED lights will
flash while charging and then remain steady when fully charged.
Charging Case Battery Levels
Charging the earbuds:
Place the earbuds in the case to begin automatic charging. The red
light on the earbuds will illuminate while charging and turn OFF when
charging is complete.
POWER ON & CONNECT
1. Earbuds power ON and automatically pair when removed from the
charging case.
2. On your device, open the Bluetooth® function, search for “Cordinate
TWS” and tap it to connect both earbuds with your mobile device.
If the earbuds fail to connect, insert both earbuds into the charging case
and repeat the previous steps.
POWER ON/OFF
Power ON
Method 1: Remove the earbuds from the charging case.
Method 2: Press and hold the touch sensor on both earbuds for
approximately three seconds or until you hear four ascending tones,
indicating the earbuds have been turned ON.
Power OFF
Press and hold the touch sensor for approximately five seconds or
until you hear four descending tones, indicating the earbuds have been
turned OFF.
AUDIO CONTROLS
Play/pause
Single tap either earbud’s touch sensor once to play or pause audio.
Next track/previous track
Double tap right earbud’s touch sensor to skip to the next track. Double
tap left earbud’s touch sensor button to skip to the previous track.
Volume control
Press and hold the touch sensor on the right earbud to increase volume.
Press and hold the touch sensor on the left earbud to decrease volume.
PHONE CONTROLS
Answer/end call
Double tap either earbud’s touch sensor to answer an incoming call or
end a current call.
Reject incoming call
Touch and hold either earbud’s touch sensor to reject call.
VOICE ASSISTANT
Activate voice assistant
Triple tap either earbud’s touch sensor to hear a beep, indicating voice
control has been activated on your device.
TROUBLESHOOTING
Earbuds fail to connect with cell phone or there is no sound in left or
right earbud.
1. Remove both earbuds from the charging case. Press and hold their
touch sensors for five seconds in power OFF mode. Do not release
your fingers until the LED lights on both earbuds flash red and blue
alternately. Then, double press the right earbud’s touch sensor.
Both earbuds will begin auto pairing after three to five seconds and
the light on one earbud will flash blue while the light on the other
earbud will flash red and blue alternately.
2. Delete the pairing name from the mobile device’s Bluetooth
pairing list.
3. On your mobile device, search for “Cordinate TWS” and tap it to
connect both earbuds with your device.
4. If the earbuds fail to connect, place both earbuds into the charging
case and repeat the previous steps.
When the LED light of both earbuds flashes red and blue alternately,
double press the right earbud’s touch sensor.
NOTES
1. If the earbuds are not used for more than two weeks, charging is
recommended.
2. Use a 5V DC, 1A charger made by a qualified manufacturer.
3. Keep distance between your device and the earbuds at 33ft. or less
and make sure nothing is blocking the signal path.
4. Earbud functions may operate dierently based on the protocols
supported by dierent wireless devices.
5. Do not clean the earbuds with harsh chemicals or strong
detergents.
6. Follow enclosed instructions. If any damage or danger occurs due
to improper use, responsibility shall be that of the operator.
WARNINGS
1. Choking hazard. This product includes small parts and may present
a choking hazard or cause other injury to small children. Keep away
from small children.
2. Medical device interference. This product contains magnets,
components and radios that emit electromagnetic fields and may
interfere with medical devices. Consult your physician and medical
device manufacturer for information specific to your medical device
and whether you need to maintain a safe distance of separation
between your medical device and the earbuds and charging case.
Manufacturers often provide recommendations on the safe use
of their devices around wireless or magnetic products to prevent
possible interference. If you suspect the earbuds and charging case
are interfering with your medical device, stop using them.
3. Do not listen at high volume levels for long periods of time, as this
may permanently damage your hearing. Background noise, as well
100%
recyclable
Paper made
from 50%
post
consumer
waste
byjasco.com/recycle
71242, 71452, 71453
EnSp Manual, 08/22
The Bluetooth® word, mark and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any use
of such marks by Jasco Products Company LLC is
under license. All brand names and products listed/
shown are trademarks or registered trademarks of their
respective owners.
For product patent information,
visit www.byjasco.com/patents.
MADE IN CHINA
Distributed by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a limited-lifetime
warranty. Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F, Central Time.
See reverse for easy-to-follow instructions
and exclusive deals.
Earbud
Silicone ear
cushions
(includes
three sizes)
Case charging
port (USB-C
input)
USB charging
cable
Multifunction
touch sensor
Microphone/
LED light
LED lights
Earbud
charging ports
Charging
case
as continued exposure to high volume levels, can make sounds
seem quieter than they actually are.
4. Do not attempt to replace earbud or charging case batteries
yourself, as this may damage the batteries, which could cause
overheating and injury.
5. Do not disassemble or modify your earbuds for any reason.
6. Do not overcharge earbuds or charging case to avoid risk of fire.
7. Do not expose earbuds or charging case to extreme temperatures
(below 0°C/32°F or above 45°C/113°F). It could cause damage,
reduce battery life and lessen the lifespan of your earbuds.
8. Do not place LED lights close to eyes.
9. Do not use earbuds during a thunderstorm, as it can cause a serious
malfunction and increase the risk of electric shock.
FCC STATEMENT
Suppliers Declaration of Conformity | Model #: 71242, 71452, 71453 |
Jasco Products Company LLC, 10 E. Memorial Rd.,
Oklahoma City, OK 73114 | www.byjasco.com
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
<25%
First light
flashes slowly
<50%
Second light
flashes slowly
<75%
Third light
flashes slowly
<100%
Fourth
light flashes
slowly
Fully charged
All lights
remain
fully lit
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment
must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provide with antenna installation instructions and
consider removing the no-collocation statement.
FCC ID: 2ATNH-BT013