Instructions / Assembly

OUTDOOR FLUORESCENT WALL FIXTURE
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them
at a later date.
________
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in
order to prevent possible shock.
_________
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure
that no parts are missing by referencing the illustrations on the installation
instructions.
____________________________
ASSEMBLY AND INSTALLATION
1. Thread the nipple (12) into the mounting bracket (9) and secure it
with a hex nut (13).
2. Thread the mounting screws (10) into the mounting bracket (9)
and through the outlet box (1) holes.
3. Pull the power supply wires out from the outlet box (1).
4. Make the following wiring connections using the wire nuts (8)
provided:
White (-) supply wire (2) to white fixture wire (3)
Black (+) supply wire (4) to black fixture wire (5)
Supply ground wire (6) to fixture ground wire (7)
5. Place the back of the hood (16) over the outlet box (1). Align the
hole on the back of the hood (16) with the nipple (12). Secure the
hood (16) to the wall using the thumb nut (14).
6. Place the diffuser (11) into the hood (16) and secure the diffuser
(11) by using the diffuser screw (15).
INSTALLATION IS NOW COMPLETE.
1. Outlet Box
2. White Supply Wire
3. White Fixture Wire
4. Black Supply Wire
5. Black Fixture Wire
6. Supply Ground Wire
7. Fixture Ground Wire
8. Wire Nuts
9. Mounting Bracket
10. Mounting Screws
11. Diffuser
12. Nipple
13. Hex Nut
14. Thumb Nut
15. Diffuser Screw
16. Hood
1
2
3
6
7
5
4
8
10
14
9
11
12
15
16
13