Installation guide
12
At the right-hand side of the front panel an alphanumeric display shows a unit ID. Multiple
converters with different Unit ID’s can be controlled from the DADman program at the same time.
The Unit ID is set in the DADman program.
4. DADman control program
Note: The Sphynx 2 is an OEM product manufactured for Merging Technologies by Digital Audio
Denmark. Digital Audio Denmark also manufactures a similar Audio Converter under the Digital
Audio Denmark brand name. This unit is called Axion. The DADman program identies these two
converters in the same manner, since a Sphynx 2 is internally labeled with a serial number that
identies it as an Axion converter.
The Sphynx 2 will therefore appear in the DADman remote control program as an Axion converter.
DADman is a generic software program that can control all the remote controlled audio converters
manufactured by DAD. Thus, different models of converters can be connected at the same time.
When a connection is established between the DADman program and the converters, the DADman
program will investigate the connected converters and upload the converter settings into the
DADman program.
By double clicking on the different communication port entries or clicking on the small + to the left
of each Communication port entry, the DADman program will establish communication between the
program and the connected converters.
If the connection is established successfully, an icon and a text label corresponding to the Axion/
Sphynx 2 converter will appear. If no converter is attached to the selected communication port, the
text: no units will appear.