User manual

Using the MAC Filter

The MAC Filter page allows you to enable or disable MAC ltering and to add or delete MAC

addresses from the trusted client list.

IMPORTANT Do not enable MAC ﬁltering unless you have added your own MAC address to

the trusted client list. Otherwise you will be unable to access your MiFi device until you use the

Master Reset button. See Using the Master Reset Button on page 65.

➊ Choose Wi-Fi > MAC Filter from the menu bar.

The MAC Filter page opens.

➋ Type the MAC address for your computer into the Add Trusted Client MAC Address box and

then click Add.

Tip! You can copy and paste your computer’s MAC address from the Wi-Fi Clients section of the Wi-Fi

Status page. See Wi-Fi Clients on page 34.

➌ Optionally, type the MAC address for another computing device into the Add Trusted Client

MAC Address box and then click Add.

➍ Select the Enable MAC Filter check box and then click Apply.