User manual
13
Wi-Fi Setup
To properly set up your MiFi device, you need to do both of the following tasks:
• Set Up a Wi-Fi Connection
• Congure Security
IMPORTANT Your MiFi device is pre-congured with AT&T network settings. If you need
to modify the AT&T network settings, contact AT&T before attempting to set up your MiFi
device.
Set Up a Wi-Fi Connection
Your MiFi device should be pre-congured for AT&T right out of the box, enabling you to connect to
the default network name (SSID) found on the sticker on the bottom of the device. See Connect to
your MiFi device: on page 13.
Connect to your MiFi device:
➊ Press the power button.
Your MiFi device powers on and starts up. When the power LED is ashing and the Wi-Fi LED
is solid, the device is ready for you to connect another device (such as your computer) to it.
➋ Use your normal Wi-Fi manager on your computer to locate the MiFi device network name
(SSID) and select it.
NOTE The network name (SSID) is printed on the label on the bottom of the device.
Tip! Windows only: The steps to connect to a Wi-Fi network vary depending on your operating system
version and whether you use the native application or third-party software.
➌ Windows: Click Connect.
Mac OS X: Click the MiFi device network name.
➍ A window prompts you for the network key (Wi-Fi Key). Type the network key (found on the
sticker on the bottom of the device) and click Connect or Join, depending on your operating
system.
NOTE The network key (Wi-Fi Key) is case-sensitive. Be sure to type it in exactly as it is printed.