User manual

Install the SIM Card and Battery

Insert the SIM card, and then insert and charge the battery. If your SIM card was pre-installed, skip

step 7.

IMPORTANT The battery must be fully charged (for a minimum of four hours) before

using your MiFi device for the rst time. After the initial use and set up, you may use the

device with the battery or the A/C charger.

The battery door cover on your MiFi device slides open and closed. No tools are required to

remove or install the battery or battery door. Using any type of tool could result in damage

to the device and to the battery. If excessive force appears necessary to move the door or

remove the battery, please return the MiFi device to where you purchased the MiFi device.

➊ Place your MiFi device on a at surface with the battery door side up.

➋ Hold the MiFi device in both hands with the label end of your MiFi device near the palms of

your hands.

➌ Place each thumb on the triangle-shaped traction bars near the corners of the MiFi device

battery door.