mi-fi four owners’ manual
1 Introduction Thank you for purchasing a CORD mi-fi four, powered speaker system. The mi-fi four is just one product in our range embracing our philosophy of “extraordinary audio visual gear”. This product has been designed and engineered to give you many years of trouble free listening enjoyment. Please ensure you carefully read this manual to gain the maximum benefit from your purchase.
2 Contents • Introduction 1 • Important safety messages 3 • What’s in the box 4 • Preparing for use 5 • iPod adaptors 6 • Set up 7 • Basic operation 9 • Troubleshooting 11 • Specifications 12 • Warranty 13 “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
3 Important safety messages • Before you power on your new CORD product, to ensure safe and efficient operation, please take the time to read these messages. • Keep these instructions in a safe place for future reference. • Pay attention to all warnings as these are important to ensure your safety and the optimum operation of this product. • Always use this product in accordance with the instructions.
4 What’s in the box • One pair of CORD mi-fi four speakers • iPod universal dock adaptors • One remote control • Foam pad feet for speakers • One owners manual • One 3.5mm stereo mini jack to RCA audio cable • One 2m, 3.5mm to 3.5mm audio signal cable • One 1.2m USB to USB cable • One 1.
5 Preparing for use • To ensure you enjoy maximum benefit from your CORD product, please take a few moments to prepare your product for use. • Please turn the speakers upside down on a soft, dry surface and apply the foam protective feet to the four corners of the speakers. • Insert the batteries into the remote control. • Carefully select the position of the speakers so that connecting cables can easily reach the other devices. If necessary you may need to purchase cables of additional length.
6 iPod adaptors iPod nano - 1st generation iPod nano - 2nd generation iPod nano - 3rd generation iPod video 30GB & classic 80GB iPod video 60GB, 80GB & classic 160GB iPod touch Adaptors for other iPod models may be available, please check our web site for details.
7 Set up • To charge and playback media from your iPod, insert your iPod into the dock on the top of the main speaker B. Please use the matching dock adaptor to ensure the safe and secure connection of your iPod. • To sync your iPod with your computer, connect the USB cable from the USB port C to the USB port on your computer. AC Power must be Off to enable Sync.
8 � � S-Video � USB Input Select � SWITCH OFF AC POWER BEFORE CONNECTING OR DISCONNECTING ACCESSORY CABLES � Volume � AUX In � RCA In � SUB Out WARNING - SHOCK HAZARD - DO NOT OPEN DO NOT EXPOSE TO MOISTURE N18041 MADE IN CHINA � Speaker Out � AC Input 240V 50Hz � Fuse: T500mAL 250V OFF Serial Number: ON POWER
9 Basic operation Main Unit (Illustration Previous Page) • To turn ON or OFF, move the Power switch to the ON or OFF position. • To select the source for playback, press the Input Select button . Pressing the Input Select button changes the input in the following sequence: iPod - AUX In - RCA In. • To increase the volume, turn the Volume control clockwise. To decrease the volume turn the Volume control counter clockwise.
10 � MUTE � MENU � � ENTER � BACKLIGHT � � � � � � VOL+ � � � REPEAT SHUFFLE � � � VOL iPod NORMAL + + BASS TREBLE _ _ RCA AUX � � �
11 Troubleshooting If you experience any difficulties with the operation of your CORD mi-fi powered speaker system, please check the table below before contacting a service centre.
12 Specifications • • • • • • • • • • • • • • • • • • • • • • • Two-way powered speaker system Studio monitor style High gloss paint finish 4” magnetically shielded paper cone woofer 1” magnetically shielded natural silk dome tweeter 60Hz to 20KHz frequency response 3.0KHz crossover frequency S/N ratio >90dB typical, A-weighted 20Watts RMS @ 4 Ohm per channel, 0.
13 Warranty Limited Warranty - Australia & New Zealand CORD products are engineered and manufactured with pride to provide excellent performance, value and years of trouble free operation. In the unlikely event that you should have trouble with your CORD product we are pleased to offer this warranty. It is important that you read the contents of this warranty and be familiar with your rights and obligations.
14 What Is Not Covered 1. The cost of delivery and insurance in transit to the service centre. It is your sole responsibility to arrange for your product to be forwarded to your nearest CORD Service Centre for repair or replacement. 2. Time taken to investigate your warranty claim where the product is found to be in good working order.
MF4 SEP 08 AB
