User guide
36
On the MiFi 2 Web Interface
To access the Data Usage page, click Data Usage on the Navigation panel. The Data Usage page
contains the following.
• Alert Level — alerts will be generated to warn you that data usage is approaching or has
reached the alert level specied on this page.
• Reset Data Counter — use to restart the data counter and set the last reset date to today’s
date.
• Settings — use to select your desired usage alert level and cycle start date.
➊ To display your estimated data usage, reset your data counter, and manage your settings,
select the Data Usage tab on the Navigation panel on the MiFi 2 Web Interface Home page.
➋ Click Reset Data Counter to restart the data counter, and to set the last reset date to today’s
date.
➌ To set your data usage alert level, select the desired option from the Usage alert level
drop-down menu. If the desired option is not available, select None, and data usage will be
recorded and displayed, but no alerts will be generated.
➍ To set the day of the month you wish the data counter to reset to zero, select the desired day
from the cycle start date drop-down menu.
➎ Click Save Changes.
NOTE Actual billed usage can be higher than estimated data usage displayed on the usage meter.