User guide

109
Using the Master Reset Button
Your MiFi 2 comes with a master reset button that allows you to return it to its factory default state.
The master reset button is recessed in a hole on the back of the device. You need a paper clip or
similar object to push the button.
➊ Make sure your MiFi 2 is powered on.
➋ Locate the master reset button on the back of the device directly below the raised SIM card
section.
➌ Insert a paper clip into the hole and hold the button down for ve (5) seconds.
Your list of wireless networks now shows the original default network when you rst
congured your device.
➍ Connect to your MiFi 2 again and re-congure it. Your pre-congured prole information
stays the same, but for any custom proles you have to enter your APN and other
information again.