User guide

4
Q: How will the user know if their MiFi 2200 activation was successful?
A When you power on your device the first time there may be a 30 second pause before
going to intermittent blinking. This is due to the MiFi 2200 supporting hands-free
activation. No intervention is required on the user’s part. If activation is successful,
when the user goes to the MiFi 2200’s web browser it should sate “activated” at the top
of the page. If it states “not activated”, please see Troubleshooting Guide for this
device.
Browser
Q: When will a user of the MiFi 2200 need to access the browser interface?
A: The MiFi 2200 browser interface will only need to be accessed or used when configuring
your device for the first time or changing the security settings or establishing more
advanced settings.
Q: How does a user of the MiFi 2200 establish their initial connection and set-up?
A: When you press the power button, the MiFi 2200 comes on and power button LED lights
up. A solid green LED indicates the device is in service and ready to connect.
Use the normal Wi-Fi manager on your computer to locate the MiFi 2200 wireless
network. Tip: the steps to connect to a Wi-Fi network vary depending on your Operating
Systems and whether you use the native application or third-party software. Generally
you click an icon (often in the System Tray for Windows or System Preferences>Network
on a Mac) where you can select “View Available Wireless Networks.” If you are
unfamiliar with wireless networking on your computer, consult the computer help
system.
If multiple wireless networks are found, highlight the one that has “MiFi” in its name.
Click Connect.
From your computer’s Web browser, enter http://192.168.1.1 into the address window
and press the Enter or Return key. Enter the password “admin” when requested. An
onscreen wizard will launch and guide you through setting up security for your MiFi
2200.
NOTE: Be sure to record both the Administrative password and the Network Key that
you create using the initial Setup Wizard. If you Cancel the wizard, you network will be
left unsecure (open). The wizard will re-launch every time you enter the browser
interface.
Follow the instructions on the screen. After you click Finish, your device will restart and
you must reconnect to your wireless network and enter the Network Key you just