User manual

17
ENGLISH
USE
Control panel
1 Programme Chart
This will help you to select the correct
programme for drying.
2 ON/OFF Button (Marcha Parada)
Press this button to switch the machine on. At
the end of the programme press it again to
switch the machine off.
3 Mains-On Light
This lights up when the machine is switched on.
(ON/OFF button pressed) and goes out by
depressing ON/OFF button again.
4 Low Temperature Button
(Reducción Temperatura)
Press this button to reduce the temperature
when drying particularly delicate items. The
corresponding light illuminates.
5 Buzzer OFF Button (Exclusión Alarma)
The buzzer will sound during the “anti- crease”
phase. Press this button to switch the buzzer off.
The corresponding light lights on.
6 START Button (Arranque)
Press this button for 2 seconds to start the
selected drying programme.
If the door is opened during the programme,
this button has to be depressed again after
closing the door to re-start the programme.
7 Control lights
Light
This light indicates that the machine is
performing the drying phase.
Light
This light indicates that the cooling phase is in
operation (10 min.).
If the light or flashes, this means that
the START button has to be depressed again to
re-start the programme.
Light
This light flashes at the end of the anti-crease
phase.
Light
The lights and flash alternately at the
end of the programme (after the cooling phase)
and during the anti-crease phase to remind you
that the programme has finished and the
laundry can be removed.
If only the light flashes this means that the
anti-crease phase has finished: the machine
stops functioning.
8 Programme Selector Dial
The selector dial allows you to select an
electronic drying programme (programmes A-H)
or a time controlled programme (programmes
60’ or 30’ min.) to finish off drying. All you have
to do is set the selector dial to the programme
required.
To cancel a programme already started, turn the
programme selector dial to “O”.
At the end of drying turn the dial to “O” before
opening the door.
1234 5678
Arranque
PROGRAMAS
SC 440
ALGODON Y LINO
Extra seco
Seco para guardar
Ligeramente húmedo
Húmedo para planchar
Húmedo para planchar
Anulación
Secado a tiempo: 30 - 60 min
SINTETICOS
Secado
Enfriamiento
Fin
Anti-pliegues
Extra seco
Seco para guardar
Ligeramente húmedo
Anulación
Marcha
Parada
A
B
C
D
E
0
F
G
H
0
AUTO
REVERSE
Reducción
temperatura
Exclusión
alarma
125993090.qxd 7/2/02 11:33 AM Pagina 17 (Nero/Process Black pellicola)