Instruction manual

9-31
9.7.6 Transferring Logomark
The FILE TRANSFER is used to transfer the logomark selected in Section 9.7.5,
"Selecting Logomark" to the main frame. To display the selected logomark, select ON in
Section 9.7.4, "Displaying Logomark". The transferred logomark is retained while the
instrument is powered on; turning power off deletes the logomark.
● Logomark Transferring Procedure
Display the LOGO SET by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＬＯＧＯ
２．ＬＯＧＯ
v ＬＯＧＯ ＳＥＴ
３．ＬＯＧＯ ＳＥＴ
v ＦＩＬＥ ＴＲＡＮＳＦＥＲ
Display the LOGO by using the [5] and [6] keys.
４．ＦＩＬＥ ＴＲＡＮＳＦＥＲ
■ＯＫ □ＣＡＮＣＥＬ
Press the ENTER key. Press the MENU key to cancel.
Display the FILTER TRANSFER by using the [5] and [6]
keys.
Select the OK by using the [3] and [4] keys.
Select the CANCEL not to transfer the logomark.
４．ＦＩＬＥ ＴＲＡＮＳＦＥＲ
■■■■■ ＣＯＭＰＬＥＴＥ ！
Press the ENTER key.
The logomark is now transferred. Press the MENU key to return
to the LOGO SET.