Instruction manual

9-30
9.7.5 Selecting Logomark
The SELECT LOGO is used to select the logomark to be transferred from the memory
card to the main frame set in Section 9.7.6, "Transferring Logomark".
The logomark can be selected form the main frame or memory card.
To save the logomark, refer to Section 9.7.8, "Saving Logomark".
● Logomark Selecting Procedure
*1 The screen below is displayed when no logomark is saved in the main frame.
Display the LOGO SET by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＬＯＧＯ
２．ＬＯＧＯ
v ＬＯＧＯ ＳＥＴ
３．ＬＯＧＯ ＳＥＴ
u ＳＥＬＥＣＴ ＬＯＧＯ
Display the LOGO by using the [5] and [6] keys.
４．ＳＥＬＥＣＴ ＬＯＧＯ
u ＬＯＧＯ．ＬＧ ＩＮＴ＿ＭＥＭ
Press the ENTER key. Press the MENU key to cancel.
Display the SELECT LOGO by using the [5] and [6] keys.
Select the file from main frame or memory card by using the
[5] and [6] keys. (*1)
４．ＳＥＬＥＣＴ ＬＯＧＯ
u＊ＬＯＧＯ．ＬＧ ＩＮＴ＿ＭＥＭ
Press the ENTER key.
"*" is displayed before the selected file.
４．ＳＥＬＥＣＴ ＬＯＧＯ
u ＮＯ ＤＡＴＡ！！ ＩＮＴ＿ＭＥＭ