Instruction manual

9-28
9.7.3 Penetrating Logomark
The LOGO BACKGROUND is used to select whether to display the LEVEL-0 logomark
set in Section 9.7.2, "Logomark Brightness".
If this function set to ON, the background of the portion of the LEVEL 0 penetrates and
can be seen.
● Settable Range
ON: Does not display the LEVEL 0. Therefore, the background can be seen.
OFF: Displays the LEVEL 0. Therefore, the background can not be seen. (initial
setting)
● Setting Procedure of Penetrating Logomark
● Example of screen display
Display the LOGO BACKGROUND by using the [5] and [6]
keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＬＯＧＯ
２．ＬＯＧＯ
v ＬＯＧＯ ＢＡＣＫＧＲＯＵＮＤ
３．ＬＯＧＯ ＢＡＣＫＧＲＯＵＮＤ
■ＯＮ □ＯＦＦ
Display the LOGO by using the [5] and [6] keys.
２．ＬＯＧＯ
v ＬＯＧＯ ＢＡＣＫＧＲＯＵＮＤ
Press the ENTER key. Press the MENU key to cancel.
Select the ON by using the [3] and [4] keys.
Select the OFF to display the LEVEL 0.
BACKGROUND OFF
BACKGROUND ON