Instruction manual

9-25
*1 Up to 1920 dots x 1080 lines can be displayed when the Option (LT 4400-70) is
installed
*2 Logomark cannot be superimposed when the CHECK FIELD pattern is selected.
9.7.1 Logomark Position
The LOGO POSITION is used to set the logomark position on the screen.
The settable range depends on the format.
● Settable Range
H (horizontal) The initial setting is 0 dot displayed at the left end of the
screen.
1080i, 1080p, 1080PsF: 0 dot to 1919 dots, in 1 dot steps
720p: 0 dot to 1279 dots, in 1 dot steps
525i, 625i: 0 dot to 719 dots, in 1 dot steps
V (vertical) The initial setting is 0 dot displayed at the top of the screen.
1080i, 1080p, 1080PsF: 0 dot to 1079 dots, in 1 dot steps
720p: 0 dot to 719 dots, in 1 dot steps
525i: 0 dot to 486 dots, in 1 dot steps
625i: 0 dot to 575 dots, in 1 dot steps
● Position Setting Procedure
Display the LOGO POSITION by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＬＯＧＯ
２．ＬＯＧＯ
u ＬＯＧＯ ＰＯＳＩＴＩＯＮ
３．ＬＯＧＯ ＰＯＳＩＴＩＯＮ
■Ｈ： １０ＤＯＴ□Ｖ： １０ＤＯＴ
Display the LOGO by using the [5] and [6] keys.
２．ＬＯＧＯ
u ＬＯＧＯ ＰＯＳＩＴＩＯＮ
Press the ENTER key. Press the MENU key to cancel.
Move the cursor to the desired item by using the [3] and [4]
keys, then set the position by using the [5] and [6] keys.