Instruction manual

9-22
9.6.5 Blinking Time of ID Character
The ID BLINK TIME is used to set the blink interval of ID character. The On and Off
intervals can be set respectively. To blink the ID character, refer to Section 9.6.6,
"Blinking ID Character" to select ON.
● Description of Setting Items
ON (blinking on time): 1 to 9second, in 1second steps (initial setting is 1sec)
OFF (blinking off time): 1 to 9second, in 1second steps (initial setting is 1sec)
● Setting Procedure of Blinking Time
Display the ID BLINK by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＩＤ ＣＨＡＲＡＣＴＥＲ
２．ＩＤ ＣＨＡＲＡＣＴＥＲ
v ＩＤ ＢＬＩＮＫ
３．ＩＤ ＢＬＩＮＫ
u ＩＤ ＢＬＩＮＫ ＴＩＭＥ
Display the ID CHARACTER by using the [5] and [6] keys.
４．ＩＤ ＢＬＩＮＫ ＴＩＭＥ
■ ＯＮ：２ ｓ □ ＯＦＦ：３ ｓ
Press the ENTER key. Press the MENU key to cancel.
Display the ID BLINK TIME by using the [5] and [6] keys.
Move the cursor to the desired item by using the [3] and [4]
keys , then set the time by using the [5] and [6] keys.
３．ＩＤ ＢＬＩＮＫ
t ＩＤ ＢＬＩＮＫ ＴＩＭＥ
Press the ENTER key.