Instruction manual

9-19
9.6.2 ID Character Position
The ID POSITION is used to set the display position of ID character.
The settable range depends on the format.
● Settable Range
H (horizontal) The initial setting is 0 dot displayed at the left end of the
screen.
1080i, 1080p, 1080PsF: 0 dot to 1919 dots, in 1 dot steps
720p: 0 dot to 1279 dots, in 1 dot steps
525i, 625i: 0 dot to 719 dots, in 1 dot steps
V (vertical) The initial setting is 0 dot displayed at the top of the screen.
1080i, 1080p, 1080PsF: 0 dot to 1079 dots, in 1 dot steps
720p: 0 dot to 719 dots, in 1 dot steps
525i: 0 dot to 486 dots, in 1 dot steps
625i: 0 dot to 575 dots, in 1 dot steps
● Position Setting Procedure
● Example of screen display
Display the ID POSITION by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＩＤ ＣＨＡＲＡＣＴＥＲ
２．ＩＤ ＣＨＡＲＡＣＴＥＲ
v ＩＤ ＰＯＳＩＴＩＯＮ
３．ＩＤ ＰＯＳＩＴＩＯＮ
■Ｈ： １０ＤＯＴ□Ｖ： １０ＤＯＴ
Display the ID CHARACTER by using the [5] and [6] keys.
２．ＩＤ ＣＨＡＲＡＣＴＥＲ
v ＩＤ ＰＯＳＩＴＩＯＮ
Press the ENTER key. Press the MENU key to cancel.
Move the cursor to the desired item by using the [3] and [4]
keys, then set the position by using the [5] and [6] keys.
H : 0DOT / V : 0DOT H : 750DOT / V : 500DOT