Instruction manual

9-15
9.5 Setting Safety Area Marker
The SAFETY AREA is used to set the safety area marker and 4:3 aspect-ratio marker.
No markers are superimposed when the CHECK FIELD pattern is selected.
9.5.1 Action Safety Area
The 90% AREA is used to determine whether to superimpose the marker on the action
safety area (90%). The marker is superimposed at the 90-% position on the 4:3
aspect-ratio marker when the ON is selected in Section 9.5.3, "4:3 Aspect-Ratio Marker".
● Description of Setting Items
ON: Superimposes the marker at the action safety area (90%).
OFF: Does not superimpose the marker at the action safety area (90%). (initial
setting)
● Displaying Procedure of Action Safety Area
● Example of screen display
Display the 90% AREA by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＳＡＦＥＴＹ ＡＲＥＡ
２．ＳＡＦＥＴＹ ＡＲＥＡ
u ９０％ ＡＲＥＡ
３．９０％ ＡＲＥＡ ＭＡＲＫＥＲ
■ＯＮ □ＯＦＦ
Display the SAFETY AREA by using the [5] and [6] keys.
２．ＳＡＦＥＴＹ ＡＲＥＡ
u ９０％ ＡＲＥＡ
Press the ENTER key. Press the MENU key to cancel.
Select the ON by using the [3] and [4] keys.
Select the OFF not to display the marker.
90% AREA ON / 4:3 AREA OFF 90% AREA ON / 4:3 AREA ON