Instruction manual

9-14

9.4 Setting ON/OFF of Y, Cb, and Cr

The "Y, Cb, Cr, ON/OFF" is used to set on/off for Y, Cb, and Cr respectively.

● Description of Setting Items

ON (■): Outputs the Y, Cb, or Cr signal selected. (initial setting)

OFF (□): Does not output the Y, Cb, or Cr signal selected.

● Setting Procedure of Output Signal

Display the “Y, Cb, Cr, ON/OFF” by using the [5] and [6]

keys.

Press the ENTER key.

１．ＳＤＩＳＥＴＴＩＮＧ

v Ｙ，Ｃｂ，ＣｒＯＮ／ＯＦＦ

２．Ｙ，Ｃｂ，ＣｒＯＮ／ＯＦＦ

■＊Ｙ ■ Ｃｂ ■ Ｃｒ

１．ＳＤＩＳＥＴＴＩＮＧ

v Ｙ，Ｃｂ，ＣｒＯＮ／ＯＦＦ

Press the ENTER key. Press the MENU key to cancel.

Position the cursor (*) to the desired item by using the [3] and

[4] keys, then select ON (■) by using the [5] key, selec

OFF (□) by using the [6] key.