Instruction manual

9-13
9.3.8 Setting Click (in each channel)
The CLICK is used to set the click for each channel.
This section only describes the setting procedure of CH 1, however, the same procedure
can also be applied to CH 2 to CH 16.
● Description of Setting Items
OFF Does not insert the click. (initial setting)
1 sec: Inserts the click in every 1 second.
2 sec: Inserts the click in every 2 seconds.
3 sec: Inserts the click in every 3 seconds.
4 sec: Inserts the click in every 4 seconds.
● Click Setting Procedure
Display the CH SELECT by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＥＭＢＥＤＤＥＤ ＡＵＤＩＯ
２．ＥＭＢＥＤＤＥＤ ＡＵＤＩＯ
v ＧＲＯＵＰ １ ＳＥＴ
３．ＧＲＯＵＰ １ ＳＥＴ
t ＣＨ ＳＥＬＥＣＴ
４．ＣＨ ＳＥＬＥＣＴ
u ＧＲＯＵＰ１ ＣＨ１
Display the EMBEDDED AUDIO by using the [5] and [6]
keys.
Select the group of channels to be set by using the [5] and
[6] keys.
５．ＧＲＯＵＰ１ ＣＨ１
t ＣＬＩＣＫ
６．ＣＬＩＣＫ （ＣＨ１）
v １ ｓｅｃ
Press the ENTER key.
Press the ENTER key.
Select the channel to be set by using the [5] and [6] keys.
Display the CLICK by using the [5] and [6] keys.
Select the click type by using the [5] and [6] keys.
The selected channel is displayed at the upper-right corner o
f
the screen.
６．ＣＬＩＣＫ （ＣＨ１）
v＊１ ｓｅｃ
Press the ENTER key. Press the MENU key to cancel.
"*" is displayed before the selected setting.
Press the ENTER key.