Instruction manual

9-12

9.3.7 Setting Level (in each channel)

The LEVEL is used to set the level for each channel.

This section only describes the setting procedure of CH 1, however, the same procedure

can also be applied to CH 2 to CH 16.

● Settable Range

-60 dBFS to 0 dBFS in 1 dBFS steps The initial setting is -20 dBFS

● Level Setting Procedure

Display the CH SELECT by using the [5] and [6] keys.

Press the ENTER key.

１．ＳＤＩＳＥＴＴＩＮＧ

v ＥＭＢＥＤＤＥＤＡＵＤＩＯ

２．ＥＭＢＥＤＤＥＤＡＵＤＩＯ

v ＧＲＯＵＰ１ＳＥＴ

３．ＧＲＯＵＰ１ＳＥＴ

t ＣＨＳＥＬＥＣＴ

４．ＣＨＳＥＬＥＣＴ

u ＧＲＯＵＰ１ＣＨ１

Display the EMBEDDED AUDIO by using the [5] and [6]

keys.

Select the group of channels to be set by using the [5] and

[6] keys.

５．ＧＲＯＵＰ１ＣＨ１

v ＬＥＶＥＬ

６．ＬＥＶＥＬ（ＣＨ１）

－２０ｄＢＦＳ

Press the ENTER key.

Select the channel to be set by using the [5] and [6] keys.

Display the LEVEL by using the [5] and [6] keys.

Select the level by using the [5] and [6] keys.

The selected channel is displayed at the upper-right corner o

the screen.

５．ＧＲＯＵＰ１ＣＨ１

v ＬＥＶＥＬ

Press the ENTER key. Press the MENU key to cancel.

Press the ENTER key.