Instruction manual

9-11

9.3.6 Setting Frequency (in each group)

The FREQUENCY is used to set the frequency for each channel.

This section only describes the setting procedure of CH 1, however, the same procedure

can also be applied to CH 2 to CH 16.

● Description of Setting Items

SILENCE: Does not set the frequency.

400Hz: Frequency is set to 400Hz.

800Hz: Frequency is set to 800Hz.

1kHz: Frequency is set to 1kHz. (initial setting)

● Frequency Setting Procedure

Display the CH SELECT by using the [5] and [6] keys.

Press the ENTER key.

１．ＳＤＩＳＥＴＴＩＮＧ

v ＥＭＢＥＤＤＥＤＡＵＤＩＯ

２．ＥＭＢＥＤＤＥＤＡＵＤＩＯ

v ＧＲＯＵＰ１ＳＥＴ

３．ＧＲＯＵＰ１ＳＥＴ

t ＣＨＳＥＬＥＣＴ

４．ＣＨＳＥＬＥＣＴ

u ＧＲＯＵＰ１ＣＨ１

Display the EMBEDDED AUDIO by using the [5] and [6]

keys.

Select the group of channels to be set by using the [5] and

[6] keys.

５．ＧＲＯＵＰ１ＣＨ１

u ＦＲＥＱＵＥＮＣＹ

６．ＦＲＥＱＵＥＮＣＹ（ＣＨ１）

v ８００Ｈｚ

Press the ENTER key.

Select the channel to be set by using the [5] and [6] keys.

Display the FREQUENCY by using the [5] and [6] keys.

Select the frequency by using the [5] and [6] keys.

The selected channel is displayed at the upper-right corner o

the screen.

６．ＦＲＥＱＵＥＮＣＹ（ＣＨ１）

v＊８００Ｈｚ

Press the ENTER key. Press the MENU key to cancel.

"*" is displayed before the selected frequency.

Press the ENTER key.