Instruction manual

9-10
9.3.5 Setting Pre-Emphasis (in each group)
The EMPHASIS is used to set the pre-emphasis mode for each group.
This section only describes the setting procedure of GROUP 1, however, the same
procedure can also be applied to GROUP 2 to GROUP 4.
● Description of Setting Items
50/15: Sets the pre-emphasis mode to 50/15.
CCITT: Sets the pre-emphasis mode to CCITT.
OFF: Sets the pre-emphasis mode to OFF. (initial setting)
● Setting Procedure of Pre-Emphasis
Select the group to be set by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＥＭＢＥＤＤＥＤ ＡＵＤＩＯ
２．ＥＭＢＥＤＤＥＤ ＡＵＤＩＯ
v ＧＲＯＵＰ １ ＳＥＴ
３．ＧＲＯＵＰ １ ＳＥＴ
v ＥＭＰＨＡＳＩＳ
Display the EMBEDDED AUDIO by using the [5] and [6]
keys.
４．ＥＭＰＨＡＳＩＳ
□５０／１５ □ＣＣＩＴＴ ■ＯＦＦ
Press the ENTER key. Press the MENU key to cancel.
Display the EMPHASIS by using the [5] and [6] keys.
Select the emphasis by using the [3] and [4] keys.
３．ＧＲＯＵＰ １ ＳＥＴ
v ＥＭＰＨＡＳＩＳ
Press the ENTER key.