Instruction manual

9-9

9.3.4 Setting Resolution (in each group)

The RESOLUTION is used to set the resolution of the digital data for each group.

When the output format is SD and the resolution of all groups is set to 24 bits, the group

number of the output channels becomes up to 3 groups.

This section only describes the setting procedure of GROUP 1, however, the same

procedure can also be applied to the GROUP 2 to GROUP 4.

● Description of Setting Items

20 Bit: Sets the resolution to 20 bits. (initial setting)

24 Bit: Sets the resolution to 24 bits.

● Resolution Setting Procedure

Select the group to be set by using the [5] and [6] keys.

Press the ENTER key.

１．ＳＤＩＳＥＴＴＩＮＧ

v ＥＭＢＥＤＤＥＤＡＵＤＩＯ

２．ＥＭＢＥＤＤＥＤＡＵＤＩＯ

v ＧＲＯＵＰ１ＳＥＴ

３．ＧＲＯＵＰ１ＳＥＴ

u ＲＥＳＯＬＵＴＩＯＮ

Display the EMBEDDED AUDIO by using the [5] and [6]

keys.

４．ＲＥＳＯＬＵＴＩＯＮ

□２０Ｂｉｔ ■２４Ｂｉｔ

Press the ENTER key. Press the MENU key to cancel.

Display the RESOLUTION by using the [5] and [6] keys.

Select the resolution by using the [3] and [4] keys.

３．ＧＲＯＵＰ１ＳＥＴ

u ＲＥＳＯＬＵＴＩＯＮ

Press the ENTER key.